Spiral steel silo production lines are constructed on-site, with the silo top installed on the ground. The forming and bending speed of the equipment can reach 5m/min, eliminating the need for scaffolding and other auxiliary facilities, thus resulting in a very short construction period. The silo is entirely made of thin steel plates, weighing only as much as the reinforcing steel in a reinforced concrete silo of the same capacity, significantly reducing costs. Furthermore, because it can use a double-layer bending method to bend and shape two different materials inside and outside the cylinder, it can significantly reduce the engineering costs for storing highly corrosive materials in industries such as chemicals and environmental protection. It has a small footprint and is easy to manage.
Unlike other steel silos, the height and diameter of spiral steel silo production lines can be arbitrarily selected within a wide range. The minimum distance between two silos is 500mm, making full use of space and reducing the footprint. The silo has a high degree of automation, and with the addition of temperature measurement and material level monitoring equipment, user management is very convenient.
Completely constructed using specialized equipment, creating distinctive features. The steel silo has excellent overall functionality and a long service life. The silo is in the construction process. During the rolling process, a spiral convex strip, 30mm-40mm wide and five times the material thickness, is formed on the outer wall of the silo, greatly enhancing its load-bearing capacity and making the overall strength, stability, and seismic resistance of the silo superior to other silos. Furthermore, the use of materials with exceptionally strong corrosion resistance extends its lifespan compared to other silos. It boasts excellent airtightness and wide applicability.
The silo is constructed above ground. The forming and bending speed of the equipment can reach 5m/min, allowing for on-site silo construction. No scaffolding or other auxiliary equipment is required, resulting in a very short construction period. The silo is entirely made of thin steel plates, with a weight comparable to the reinforcing steel in a reinforced concrete silo of the same capacity, significantly reducing costs. Additionally, because it can use a double-layer bending method to bend and shape the two different materials inside and outside the silo, it can significantly reduce the engineering costs for storing highly corrosive materials in chemical and environmental protection operations. It occupies a small area and is easy to manage.
Height and diameter can be arbitrarily selected within a wide range of constraints. The minimum spacing between two silos is 500mm to maximize space utilization, unlike other steel silos. This reduces the floor space required. The silos boast a high level of automation, and with the addition of temperature and level monitoring equipment, user management is extremely convenient.
Technically, the quality of any part of the silo body can be guaranteed. Because the silos are bent and seamed using specialized equipment, their sealing is exceptionally good. For example, silos can meet the technical requirements for pest control and fumigation when storing grains. Furthermore, depending on the properties of the solid and liquid materials being stored and the technical requirements, various materials can be selected for the silo body. This allows for wide application in industrial fields such as grain and brewing, urban and rural wastewater treatment, and agriculture. Construction time is short and costs are low.
